Customer Login
If you are already registered, please log in. Si ya tiene una cuenta ingrese aquí
If you are already registered, please log in. Si ya tiene una cuenta ingrese aquí
Zoom the image with the mouse Zoom en la imagen usando el mouse
The fastest, easiest for using, most modern and accurate system to detect gold, and the coins under the ground.
GOLD SEEKER device works by two systems to determine between the precious and non-precious metals.
It has been added the feature of ground induction to this device, which is capable of generating (Eddy Current) (transmitter and receiver).
When the device is working, it sends a signal to the search coil (Double D Coil) which, in turn, generates a spiral current signal (Eddy Current).
This will create spiral waves amplifies to more than 1000 pules per second to assist the device to cover greater depths as well as analyze the signal from the target to determine if the metal detected is precious or non-precious.
A unique feature of this device is its ability to calibrate with the ground to ensure that it is not affected by any signals resulting from moisture in the soil, mineral rocks or land containing mineral salts or solid ground.
The search way in GOLD SEEKER device
After the ground balance process and sensitivity setting are adjusted, you can start searching by lifting the search coil 2cm above the ground and sweeping it right and left, keeping it parallel to the ground.
When a precious metal signal is picked up, the device will make a continuous beep sound and the green indicator comes on.
If the signal is for a non-precious metal detected, the device will be make an intermittent sound and the red indicator comes on
If the signal from the detected target is weak, press the tune button to increase the sensing range of the coil to reach greater depths, and confirm the target.
To avoid missing small and deep targets, sweep the search coil from right to left and left to right over each area you are scanning.
To make sure the target type is precious or non-precious, hover the coil slowly over the target.
To make sure the target type is precious or non-precious, stop the coil above the target while keeping it above the ground a 2-cm distance.
GOLD SEEKER - Technical Specifications
Parts and Component for GOLD SEEKER device
Brochure for GOLD SEEKER device
If you are already registered, please log in. Si ya tiene una cuenta ingrese aquí